JinzhouCambered surface whipstock

The cambered whipstock is a normal type. The whipface is a circular arc surface, and has been super hardened. The whipface and the casing window milling cone have a high degree of agreement, and the righting effect is good. The opened window is regular, smooth and accurate; During the drilling process, the weight on bit is easy to control, which reduces get stuck and bit bounce, and reduces the occurrence of downhole accidents.

Category:

JinzhouSidetracking tool

Inquiry

Product Description

The cambered surface whipstock (or the arc whipstock) is developed based no the ordinary whipstock. The whipface is a circular arc surface, and has been super hardened. The cambered surface whipstock and the casing window milling cone have a high degree of agreement, and the righting effect is good. The opened window is regular, smooth and accurate; During the drilling process, the weight on bit is easy to control, which reduces get stuck and bit bounce, and reduces the occurrence of downhole accidents.

Basic parameters and performance data

Type	Casing OD, in	Whipstock OD, mm	Whipstock Length, mm	Window length(mm)	Well deviation range, °	Well temperature range, ℃	Setting method	Thread type
DXQ102/H	5〃	φ102	3210	1600~1800	≤40°	≤200℃	Directly pressure	2 7/8REG
DXQ102F/H		Φ102	3720
DXQ102FS/H	(φ127)	Φ102	4200
DXQ114/H	5 1/2〃	φ114	3450	1800~2000				2 7/8REG

	(φ139.7)							or
DXQ114F/H		φ114	3960
DXQ114FS/H		φ114	4890					NC31
DXQ138/H	65/8〃	φ138	3940	2000~2200				3 1/2REG

	(φ168.28)							or

DXQ138F/H		φ138	4450					NC38
DXQ150	7〃	φ150	4000	2400~2500				3 1/2REG

	(φ177.8)							or

DXQ150F		φ150	4200					NC38
DXQ160	7 5/8〃	φ160	4200	2500~2700				3 1/2REG

	(φ193.68)							or

DXQ160F		φ160	4400					NC38
DXQ210	9 5/8〃	φ210	4600	2700~3000				4 1/2REG

	(φ244.5)							or

DXQ210F		φ210	4800					NC50
DXQ300	13 3/8＂	Φ300	5600	3800~4300				4 1/2REG

	(φ339.7)							or

DXQ300F		Φ300	5800					NC50