MengziDrill stabilizer
The overall three-helix and four-helix stabilizers are divided into bottom hole type and drill string type. The wear-resistant materials (ie centralizers) on the working surface include cemented carbide pillars on the surface, diamond composites on the surface, and hardfacing electrodes, Various forms such as low temperature brazing hard alloy.
Category:
Product Description
The overall three-helix and four-helix stabilizers are divided into bottom hole type and drill string type. The wear-resistant materials (ie centralizers) on the working surface include cemented carbide pillars on the surface, diamond composites on the surface, and hardfacing electrodes, Various forms such as low temperature brazing hard alloy.
Basic parameters and performance data.
| Drill stabilizer type, in | Working OD, mm | End OD of body, mm | ID, mm | Length, mm | Thread type | |
| Female buckle | Male buckle | |||||
| 6 | 152.2 | 121 | 51 | 1200 | NC38 | 3 1/2 REG |
| 6 1/4 | 158.7 | |||||
| 6 1/2 | 165.1 | |||||
| 7 1/2 | 190.5 | 159 | 57 | 1600 | NC46 | 4 1/2 REG |
| 7 7/8 | 200 | |||||
| 8 3/8 | 212.7 | 159 | 71 |
1600
1800 |
NC46
NC50 |
|
| 165 | ||||||
| 8 1/2 | 215.2 |
159 165 178 |
||||
| 8 3/4 | 222.2 | |||||
| 9 1/2 | 241.3 |
178 197 |
1600 | NC50 | ||
| 9 5/8 | 344.5 | 1800 | 6 5/8 REG | |||
| 9 7/8 | 250.8 | |||||
| 12 1/4 | 311.1 |
203 209 |
76 | 1800 | NC56 | 6 5/8 REG |
| 6 5/8 REG | ||||||
| 16 | 406 |
229
241.3 |
2000
2200 |
NC61
7 5/8 REG |
||
| 17 1/2 | 444.5 | |||||
| 24 | 609.6 | |||||
| 26 | 660.4 | |||||
| 28 | 711.2 | |||||
| Note: Drill stabilizer can be made according to customer’s special requirement. | ||||||
Next article