1. Use the installation reference surface installation method
First, use the assembly screws to fix the bottom reference surface of the linear guide to the bottom assembly surface of the bed table, and then use a vise to press the side reference surface of the slide rail against the side mounting surface of the bed table to determine the position of the slide rail, and then use a torque wrench. Tighten the fixing screws in sequence with a certain torque, and press the base surface of the bottom of the slide rail against the bottom assembly surface of the bed.

Second, the installation of the driven side linear guide
Place the linear block gauge between the two linear guide rails, use the dial gauge to calibrate the linear block gauge to make it parallel to the side reference plane of the reference side slide rail, and then calibrate the driven side slide rail and the driven rail according to the linear block gauge. start to calibrate and tighten the assembly screws with the specified torque in sequence.